Skip to content

Estimated reading time: 12 min

Sewing belts: tutorials, tips & upcycling ideas

16.05.2023 by Sabine Schmidt

Gürtel nähen: Anleitungen, Tipps & Upcycling-Ideen

Sewing a belt: In this tutorial, we show you how you can easily sew belts made from denim, faux leather, webbing, or fabric scraps.

The most important things at a glance

  • Sewing belts is fun and easy to do, even for beginners
  • You can sew the belts from various materials – to match your wardrobe
  • For snazzy, colorful belts, you can dig deep into your scrap box and use up fabric remnants
  • Sewing level: Easy
  • Sewing time: 1 hour

YouTube tutorial on sewing a belt

Why should I sew a belt myself?

There are many good reasons to give it a try! For example, you can design your belt according to your own ideas and create a unique design that no one else has.

Or you can ensure your belt fits perfectly, with your exact measurements.

And if you decide to use fabric scraps or upcycle an old pair of jeans, it is also a meaningful contribution to sustainability.

If you are a beginner looking for a new DIY project, you will have a great sense of achievement with this entry-level project.

Grab the ingredients for your favorite belt and get started.

How do I sew a belt?

It is easier than you might think, and you will be thrilled with the result!

You only need a sewing machine, the material of your choice, matching thread, pins, scissors, and a measuring tape. If you also use waistband interfacing to stabilize the fabric, the belt is sewn especially quickly.

Which materials are suitable for sewing a belt?

Webbing, faux leather, denim, cotton, and decorative fabrics are excellent for sewing a belt. Here, I will introduce the materials to you in more detail:

  • Webbing is a robust and versatile material often used in the manufacture of backpacks, bags, and straps. It is available in many different widths and colors and is made of nylon, polyester, or cotton. Webbing is very durable, water-resistant, and resistant to abrasion and wear. It can be processed relatively easily and is a great choice for belts due to its strength and versatility.
  • Faux leather is an affordable and vegan alternative to real leather. It is also robust and durable. Furthermore, faux leather is available in many different colors and textures. However, you should note that faux leather is not as long-lasting as real leather and can show cracks or signs of wear over time. So, if you want to sew a belt that will be worn very frequently, it might be more sensible to use a different material.
  • Making belts from denim scraps or fabric remnants is a great way to reuse old clothing or small fabric scraps that would otherwise end up in the trash. In addition, belts made from these materials have a unique look and their own story. So, if you have an old pair of jeans or a piece of fabric that you no longer need, they are ideal for sewing a belt. However, you should ensure that the materials are robust enough; you can reinforce them with interfacing if necessary to make them more stable.

What do I need for sewing a belt?

Basically, you need all the materials that you should also have on hand for other sewing projects:

Which interfacing is recommended?

I worked with Vliesline waistband interfacing*, which is available in various widths (finished widths from 2.5 cm to 4 cm). This is very practical, as you do not have to mark anything. You simply fold in the pre-creased edges, and the belt is ready to be topstitched.

You can also use the fusible woven interfacing S 320*.

Sewing a belt - closing the belt

How can I fasten self-sewn belts?

There are various possibilities, e.g.

Conclusion: Sewing belts is fun!

Sewing belts is a great way to create unique accessories and give your outfit a personal touch. You can try out new materials, and within a very short time, you will not only have learned a lot but also made several new stylish belts.

Happy simple sewing, Birgit & Sabine

Belt sewing tutorial
Belt sewing tutorial

Links marked with * are affiliate links: If you make a purchase through them, we receive a small commission. The price remains the same for you.

Step-by-step instructions

Instructions 1 / 6

Sew a belt from webbing

Webbing belts are one of the simplest and most straightforward ways to make a belt. With just one seam you can quickly and easily make a sturdy, robust belt. The webbing simply needs to be cut to the desired length, fitted with a belt buckle and possibly sewn at the ends.

To work out the length of webbing you need, place the tape measure around your waistband, exactly where the belt should sit. Add 13-20 cm to this measurement.

How long your webbing should be is a very personal decision.

Why not just try it out on your favourite belt and then decide.

These are the materials you need for the webbing belt. An awl and a small wooden board are also helpful.

You'll find out why in picture 4,

  1. Step

    Materials

    The easiest way to finish the edges of polyester webbing is with a lighter.

    But be careful, it smells a bit. If you are sensitive to that, singe the edge outdoors.

    If you are using cotton webbing, fold the edges under twice and it will look neat too.

    Materials
  2. Step

    I make the hole I need for the prong of the belt buckle 6 cm from the end of the webbing. To do this, I mark the webbing with white chalk.

  3. Step

    Here I mark the centre at 2 cm.

  4. Step

    Now an awl or another very pointed tool will help you pierce a hole for the prong in the webbing.

    Work on a small board when piercing the hole, otherwise you might end up with holes in your tabletop.

  5. Step

    I had this old belt buckle in my stash, which used to be attached to my favourite belt.

    In the picture you can see exactly how the webbing is threaded onto the prong and the buckle.

  6. Step

    This is what the back of the belt buckle looks like.

  7. Step

    The red line shows you where you should later sew over it with the sewing machine.

  8. Step

    Here you can see not only my "old" belt buckle but also, on the left side, the three holes made with the awl.

    To get the holes in exactly the right place, I put the belt. around my waist and marked with chalk where the holes should be pierced with the awl.

Instructions 2 / 6

Sew a belt from cotton or home decor fabric

When it comes to cotton or home decor fabric scraps, I can draw on a large fabric stash.

You're sure to have 10 cm of fabric in a long enough length in your stash too.

Since I'm using a fabric buckle here, the length of your fabric strip is again based on the point on your hips where the belt should sit, plus 10 - 15 cm extra.

For sewing, you should use a size 90 sewing machine needle. A jeans needle of the same size also works well. For this belt you need exactly 3 seams!

In the picture you can see all the materials you should have ready.

Waistband interfacing comes in a light and a heavy version and in different widths. I use waistband interfacing with a finished width of 4 cm, as my buckle is also 4 cm wide.

I used a buckle as the closure here. This closure has one drawback: you can't simply change the length, you have to unpick a seam to do so.

  1. Step

    Materials

    If possible, the cut fabric should be 2 cm wider than the waistband interfacing.

    The 2 cm seam allowance is optional. If you are short of fabric, you can also make the fabric strip exactly as wide as your waistband strip :).

    Materials
  2. Step

    Iron the waistband interfacing onto the wrong side of the fabric with your iron.

    The fusible interfacing bonds with the fabric very quickly, so this step is done in no time.

  3. Step

    Press the short edges 1 cm inwards.

    Also press the long edges towards the wrong side along the perforated line.

  4. Step

    In the picture you can clearly see how it is done.

  5. Step

    Fold in and pin everything securely with pins or clips.

  6. Step

    This is what it looks like and now you are ready to sew the long seam and the two short edges in one go.

  7. Step

    I use a longer stitch (3.5 mm). It simply looks better for topstitching. I set my needle position to 5 and edgestitch along the fabric edge.

    Tip: I do not start sewing right at the fabric edge. The sewing machine starts sewing better when the presser foot sits completely level.

  8. Step

    There we go, the fabric strip is now completely sewn.

  9. Step

    Now you need to pull the narrow fabric edge through the opening of the buckle.

    Be careful while fiddling it through so the little teeth on the buckle do not snag any threads on the fabric.

  10. Step

    Check the length of your belt once more; it should fit perfectly.

    Fold the narrow sides at the beginning and end of your strip inwards and pin them.

    I sewed with white thread on the white fabric strip so the seam does not stand out.

  11. Step

    The belt is finished. Wasn't that incredibly quick?

Instructions 3 / 6

Sew a belt from denim scraps

Belts made from denim scraps are a great way to reuse worn-out jeans while creating a new, useful accessory. The sturdy denim ensures the belt lasts a long time and still looks stylish after many years. So it's really worth turning the scraps of your old jeans into a durable, stylish belt.

For sewing, you should use a size 90 or 100 jeans needle. The fabric is four layers thick in some places and it would be a shame if your needle broke. As with other thick materials, you can set the straight stitch on your sewing machine a little longer.

For this belt I also used a metal buckle and a small piece of leather (4 cm wide and 15 cm long). This is extremely practical, as the leather doesn't fray and you don't have to secure any fabric edges. Cork fabric, SnapPap or faux leather also work great, by the way.

Cut the jeans off 2 cm below the waistband. I only had to unpick one seam on my jeans and could then easily cut out the denim at the waistband. This step takes a little patience.

  1. Step

    With a good seam ripper and sharp scissors you can manage this step!

  2. Step

    Cut as close to the waistband as possible.

  3. Step

    This is what it should look like now.

    Now you need two leather strips.

  4. Step

    Place the leather or faux leather strip around the bar on both sides and sew it in place.

  5. Step

    Before you sew the metal buckle together with the fabric onto your belt, check that it fits you perfectly.

  6. Step

    In the picture you can see that I topstitched the waistband opening and the belt loops at the same time with matching sewing thread.

Instructions 4 / 6

Belt upcycling

With this tutorial, I want to inspire you to take a kind look at old and broken belts.

What can be reused, such as the belt buckle, or which belt can be given a new lease of life with a few simple steps?

Take a look at my simple belt made from belt strap. I loved wearing it for many years, but now the faux leather is completely worn at the ends. In my fabric stash I found enough dark brown faux leather. Take a look at how I did it.

What do you think of my "new" belt? I'm very happy with it and I'm sure I'll use it a lot in the coming years.

  1. Step

    Belt upcycling

    In the 1st picture you can see the shabby belt ends.

    I cut off the 2 ends of the belt strap with my fabric scissors.

    The two brass-coloured D-rings are reused.

    My belt strap is 3 cm wide. I cut the short piece of faux leather slightly wider, i.e. 3.2 cm wide and 6 cm long. That way I can wrap it neatly around the end of the belt strap and secure it with a long fabric clip.

    Tip. When I take a new sewing machine needle out of its case, I place a pin in exactly the spot where I took the needle out. That way I always know which needle size is in the machine.

    Use a long stitch length for topstitching. It simply looks better. I set it to 4.0.

    If you want to sew the faux leather, make sure the presser foot is level before you start, or place a hump jumper under the presser foot. This helps the sewing machine get started. If you would like more information on how to sew over thick spots, read on here.

    Belt upcycling

Instructions 5 / 6

Sew a belt from fabric scraps

You love your fabric scraps and would like to have them with you all the time? Now you can even make them part of your wardrobe! Just whip up a belt from fabric scraps and enjoy the colourful mix of fabrics.

The fabric strip is made just like the first fabric belt. For this belt you also need 2 slide buckles.

Wrap one end of the fabric around the first slide buckle and sew it in place with a stitch length of 4.0. Then slide the second slide buckle onto the other end of the fabric strip. To close the belt, thread the loose end through the first slide buckle. You can see exactly how in the video.

  1. Step

    Done!

    Sewing a belt from fabric scraps is easy and you can combine the fabrics entirely to your taste. It looks especially lovely worn over a dress.

    Done!

Instructions 6 / 6

Sew a faux leather belt

A faux leather belt is durable and versatile.

You should sew with a jeans needle or a size 100 needle. If you have a walking foot, use it. Alternatively, you can use a Teflon foot here. This feeds the leather evenly and makes the seams look beautiful.

I've also heard of people using the normal presser foot with washi tape stuck underneath. I don't stick anything on my good presser foot :)

The width of your faux leather strip depends on the width of your buckle. Cut the faux leather strip to size and then mark the centre. Fold the edges of the faux leather to the centre mark and hold them in place with clips.

  1. Step

    Now you need a hole to thread the prong through. Take an awl or another pointed tool. Place a small board underneath while you work so your table stays free of holes.

  2. Step

    Thread the prong through the hole, exactly as you see in the picture.

    The belt loop must be long enough to go loosely once around the whole belt.

    Sew one end of the belt loop to the back of the belt.

    Then all you need to do is wrap the loop all the way around the belt.

  3. Step

    Now you need to sew the two ends of the belt loop together with a hand sewing needle.

  4. Step

    The belt loop gives this belt that certain something. What do you think?

Comments

Comments are loading …

About the author

Sabine

I come from Siegen-Wittgenstein, where I spent my childhood breaking in cows, jumping off haystacks and scraping a D- in needlework class.

Today, being creative feels like indescribable happiness to me – and it grows even more when I can share it with others. Since 2016 I have been celebrating my passion for sewing on this blog, and I love that sewing connects so many people.