Skip to content

Estimated reading time: 11 mins

Sewing a cover: Sew your own shower cap or bowl cover in 15 minutes

28.02.2022 by Sabine Schmidt

Haube nähen: Duschhaube oder Schüsselhaube in 15 Minuten selber nähen

Sewing a hood: Whether as a shower cap or a cover for bowls or the Thermomix – in this guide you will learn how to sew hoods and how to make the pattern yourself in any size.

The most important things at a glance

  • In this post, you will learn why shower and bowl covers are a great step towards more sustainability
  • and which fabrics are particularly well-suited for this
  • I will show you in the picture tutorial how you can quickly sew your own covers.
  • I will share a tip on how you can turn this into an upcycling project
  • You don't need to print out a sewing pattern
  • I will show you how to easily sew special fabrics with your sewing machine.
  • Sewing level: Beginner
  • Sewing time: 15 minutes

1 sewing project, 2 uses: Sewing hoods for the bathroom or the kitchen


Perhaps you think that shower caps are a thing from the 50s? Haha, believe me: once you have one, you won't want to be without it anymore. And then you'll suddenly find they aren't so retro after all... :)

And in the kitchen, I can't do without my little everyday helpers either: Leftover food is airtight and neatly stored in the fridge in no time at all. Or the party salad gets a pretty cover. You won't just get admiring "Ahs and OHs!" for your salad, but also for your cool and sustainable cover.

That's why we want to sew a great hood together in this guide.

Perhaps you already know my sew a bandana guide, with which you can also sew a surgical cap? Then I have another cool sewing idea for you today. With this guide, you can make the pattern for bowl covers or shower caps yourself.

Do you need a practical cover for the Thermomix? You can, of course, also make a sustainable Thermomix cover yourself with this guide.

 

Why should I sew a shower cap myself?

Because it is a super fast, beautiful, and above all useful and sustainable sewing project. At the beginning, I sewed two of them, and now I definitely have 20 shower and bowl covers in use. Shower caps are just so practical, especially for long hair.

You know, women shower in three ways: with hair, without hair, and hair only. ;) And without hair means: it should stay dry! So, quickly put on the shower cap, and no annoying blow-drying or restyling - your hairstyle stays in place. Or you want to go swimming but don't want to ruin your hair: with your self-sewn shower cap, you'll also look great at the swimming pool!

 

Can I also use the shower cap as a bowl cover?

Of course! It just needs to fit the circumference. Otherwise, it is the same sewing project. Naturally, for hygienic reasons, you should decide at the beginning whether you are using it for food or for your hair... We all want to live a bit more sustainably and avoid waste.

And shower caps help us do that in a simple but also decorative way. With shower caps in your personal favorite fabrics, you can easily create a pretty splash of color in your kitchen that will immediately put you in a good mood when using them. Save the environment and look good - what more could you want!

How can I wash the hood?

Cotton fabrics (including coated ones) can usually be washed at 40 degrees in the washing machine. If you want to be particularly sustainable, you can, of course, also make your own detergent.

What fabrics can I use to sew the hood?

You need 2 fabrics for this - a water-repellent fabric and a simple cotton fabric*.

I am a big fan of vintage, retro, and floral designs. Small patterns work particularly well on bowl covers. I like it colorful and eclectic: many different patterns and designs mixed together.

But the colorful bowl covers also look good enough to eat when gathered in a group. Your cotton fabric should be relatively light and not too stiff so that the cover adjusts nicely to your head or the bowl.

Read more here about my tips for sewing cotton fabric.

Here are my fabric recommendations for self-sewn hoods:

My tip: You can also sew both sides of the hood out of coated fabric*, then it is washable on both sides.

Of course, you can also create the hood out of homemade oilcloth. In my guide make your own oilcloth, I show you how easy that works.

Can I also sew an upcycling hood?

Definitely. You need a water-repellent fabric: you can, of course, also use a shower curtain for this. If you have already used it, wash it once at 60 degrees (many shower curtains can handle this nowadays - but definitely check the label!).

You can also just buy a new plastic curtain at a furniture discount store; they are often cheaper than oilcloth by the meter.

Are you interested in the topic of sustainability? Then click over to my post sustainable sewing with 20+ great sewing guides.

 

What must my sewing machine be able to do?

For your hood project, your sewing machine just needs to be able to sew straight - nothing more!

Water-repellent fabrics or plastic fabrics don't glide as well under the presser foot. Therefore, you can help your sewing machine a bit by sticking a piece of washi tape or masking tape under your presser foot. Then it will glide better. However, there are also special Teflon presser feet, then it glides well too. You can easily order these Teflon presser feet* online; they are available for practically every sewing machine.

Usually, it is also included in the large sewing foot set*. Almost everyone buys that sooner or later anyway. If you also have such a set in your drawer and don't know what the individual sewing feet are good for, take a look at this post: 36 sewing feet and their use.

Reading tip: Sewing with oilcloth and coated cotton

Sewing a shower cap – what dimensions?

For the shower cap, you need fabric circles with a diameter of 45 to 48 cm.

If you have a larger head or want to hide especially a lot of hair underneath, then add another 5 to 10 cm.

You can adjust the elastic to your head; it shouldn't sit too tight and shouldn't slip. I always take 60 cm of elastic band so that I can easily tie a knot at the end.

Sewing a hood

What should I pay attention to when sewing a hood?

The stitch length shouldn't be too short with water-repellent fabric or plastic fabrics. That means, feel free to set your stitch length to more than 2.5.

If the stitch length is too short, it can happen that you perforate your plastic fabric instead of sewing it. Then the fabric tears between the individual stitches, which we definitely don't want.

So: feel free to set the stitch length to 3. That still holds enough, and your plastic fabric won't be damaged.

 

What should I pay attention to when sewing a shower cap?

When sewing a shower cap, you should keep in mind that not only your head, but also your hair needs to fit inside.

Here is how it's done: I assume a diameter of 48 cm. If you have waist-length flowing hair or just have a lot, a lot of hair, then add another 5 to 10 cm. Then it fits.

And regarding the elastic band: it shouldn't slip but also shouldn't cut in. So it shouldn't leave any red pressure marks on your forehead... ;)

 

What should I pay attention to when sewing a bowl cover?

When sewing the bowl cover, you must use the bowl circumference at the top edge of the bowl as a benchmark.

Here is how it's done: Draw the bowl circumference on your fabric and then add a good 5 cm of seam allowance. So, in total, 10 cm more in diameter. Then it will hold really well. If the elastic sits too narrowly over the edge of the bowl, it can slip off more easily.

Sewing a hood: As a shower cap or bowl cover

What do I need to be able to do if I want to sew a hood?

You need to know how to turn on the sewing machine and be able to sew straight. That's it.

The following sewing techniques are required:

What materials do I need for sewing a hood?

You need:

Sewing a hood: Required materials

 

Sewing a hood: How do I make the pattern myself?

There are 3 ways to make the pattern for the hood yourself:

  1. You use a pencil compass: You can make one yourself.
  • Tie two pens together with a string or ribbon.
  • The string should be half as long as the entire width of the required pattern.
  • So: diameter of the circle: 2
  • One hand holds the pen in the middle, the other draws a circle around it with the second pen
Make a pencil compass yourself

2. You draw a reusable template for the hood out of paper

  • For this, you can use, for example, a plate, a large lid, or another suitable object
  • Simply draw the outline of the object onto a piece of paper or cardboard
  • Advantage: You can use the cutting template again and again
3. You use the bowl itself as a template
  • For this, place the bowl upside down on your two fabrics
  • First, transfer the bowl rim circumference to the wrong side of the fabric
  • Add another 5 cm seam allowance with a ruler

YouTube guide: Sewing a hood

Conclusion

Caution: Sewing hoods is very addictive. You just always need one more. I don't know what it looks like in your kitchen, but I will eventually save the world with little bowls, and of course, THEY ALL need their own hood.

TIP: Of course you can buy water-repellent fabric - but there is no fabric that is cheaper or more waterproof than shower curtains.

So: if you still have an old shower curtain - throw it in the washing machine and sew a few shower caps for yourself and your friends.

But seriously: with bowl covers, you can easily reduce waste and take a step towards sustainability. So: join in!

Happy simple sewing

your Sabine

Sewing a cover: As a shower cap or bowl cover

Frequently Asked Questions

How can I sew a shower cap or bowl cover myself?

Very simple: You cut out two circles of fabric with the appropriate diameter, sew them together, and attach an elastic band to the edge... done!

What do I need to sew a cover myself?

You need a water-repellent fabric for the outside, an inner lining, and the circumference of the bowl or head... that's all!

Can beginners also sew a cover?

Of course, a self-sewn cover is the perfect beginner project. The water-repellent fabric can be a little challenging under the sewing machine, but I'll reveal a super trick for that in the instructions!

Links marked with * are affiliate links: If you make a purchase through them, we receive a small commission. The price remains the same for you.

Step-by-step instructions

Sew a cover in 5 steps

A cover like this is really sewn in a flash, making it the perfect sewing project for beginners. This tutorial works for both the shower cap and the bowl cover.

  1. Step

    Step 1: Prepare the fabric pieces

    • Shower cap: circle diameter 48 cm.
    • Bowl: diameter of the bowl rim plus 10 cm.
    • Use a pencil compass to draw the circle on the wrong side of the fabric (or trace around the bowl).
    • Draw a 5 cm seam allowance around the circle and cut out the circle with seam allowance.
    • Transfer the template onto the second fabric.
    Step 1: Prepare the fabric pieces
  2. Step

    Step 2: Sew the fabric layers together

    Place the two fabric circles with their nice sides facing each other.

    Sew them together a presser foot's width from the edge, leaving a turning gap of about 5 cm open.

    Use a straight stitch 2.5 - 3 mm long and secure the ends of the seam by stitching forwards and backwards. Trim the seam allowances with pinking shears to just before the seam, so the seam is easier to shape.

    Step 2: Sew the fabric layers together
  3. Step

    Step 3: Sew the drawstring casing

    Turn the cap right side out and smooth the fabric neatly. Shape the seams with a wooden spoon. The cap can be pressed as long as the soleplate of the iron doesn't touch the coated fabric directly.

    Attach the seam guide to your presser foot holder and set it to 2 cm. For the drawstring casing, sew all the way around the circle once, 2 cm from the edge.

    Attach two safety pins to the two ends of the elastic. Pin one safety pin to the cap so it doesn't slip away and pull the other one with the elastic through the casing.

    Step 3: Sew the drawstring casing
  4. Step

    Step 4: Try on the cap

    Quickly try on the shower cap or put it on your bowl to test whether it fits.

    Too loose or too tight? Then make the knot a little tighter or looser.

    When the fit is right: tie a firm knot, trim the elastic ends to just before the knot and hide the knot in the casing a little away from the turning gap.

    Step 4: Try on the cap
  5. Step

    Step 5: Finish the cap

    Fold the seam allowances of the turning gap to the inside. Tip: Clip the seam allowance at 1 cm intervals, so it folds in more neatly.

    Topstitch all the way around the fabric circle once with a straight stitch, closing the turning gap as you go.

    Make sure the raw fabric edges at the turning gap lie neatly on the inside — done!

    Step 5: Finish the cap

Comments

Comments are loading …

About the author

Sabine

I come from Siegen-Wittgenstein, where I spent my childhood breaking in cows, jumping off haystacks and scraping a D- in needlework class.

Today, being creative feels like indescribable happiness to me – and it grows even more when I can share it with others. Since 2016 I have been celebrating my passion for sewing on this blog, and I love that sewing connects so many people.