In this post you will learn everything about my new cover machine - the Baby Lock CoverStitch: experience, review and unboxing. And my first, cautious sewing attempts! :)
Why the Baby Lock CoverStitch?
I have wanted a cover machine for a long time - but could never really decide. Of course I compared a lot, tried different machines and considered how much I want to invest in such a cover machine.
Last but not least, I also considered whether to buy it online or from a specialist dealer. Fortunately, I have a really great specialist dealer nearby, where I not only get advice but also ongoing assistance if I have questions about the machines purchased there.
After much consideration, I decided on the Baby Lock CoverStitch*. On the one hand, because the specialist dealer knows me and my "sewing adventures" quite well and recommended it to me.
On the other hand, because I already work with the Baby Lock overlocker and am still completely convinced by the machine after two years. I have never had problems with the overlocker and honestly, I also trust the Baby Lock brand. If they build a really great sewing machine, I would probably be the first one to get one.
Unboxing the Baby Lock CoverStitch
This is how the Baby Lock CoverStitch arrived:
Freed from the box:
I just think it looks beautiful. Simple, pure, reduced to the bare essentials.
This is what the included accessories look like:
It comes packed in two plastic cases. The smaller case is stored in the storage compartment (in the middle of the image, open).
Threading the Baby Lock CoverStitch
And then I dared to thread the CoverStitch for the first time. Boy, boy, was I nervous. Fortunately, my wonderful sewing machine dealer had simply cut the old threads.
So I was able to thread it quite easily using the knot method. I had already taken a few cones of my favorite sewing thread for the overlocker with me.
Toldi by Gütermann* is usually my first choice when it comes to sewing clothes, along with the so-called Baby Lock cone threads*. Feel free to read my article on Overlocker vs. Coverlock - there are also important tips about sewing thread!
A really, really well-made, tear-resistant thread with which my seams turn out great!
I tie the two threads together and then gently pull the knot towards the needle with the presser foot raised.
There I cut it off (because the knot doesn't fit through the eye) and thread it again. Voilá! :)
The bobbin case is threaded using the Jet-Air system, which I already know from my overlocker.
This is really easy.
Close the Jet-Air system and push the thread a few centimeters into the opening:
Press firmly on the lever to the right:
Then the thread end is already in the reservoir:
It just stays there - the machine picks up the thread itself. What a luxury.
Now open the Jet-Air system again:
And now you can start sewing!
My first seam! ;)
It's incredible how elastic the seam is! And I already thought my hems with a twin stitch were cool.
This is a whole new level, I guess. And it makes me want to sew clothes even more, I have to say.
Facts
*Features: 1500 stitches/min., manual thread tension, Jet-Air threading system, sews with 4 cones, rather small working area, LED light, hand threading aid, automatic release of thread tension at the end of the seam, lots of accessories available, transporter with 3 feed dogs, 4-year warranty
Suitable for: Beginners, hobby sewers, professionals
Price: ++++
Conclusion and Test Result
For around €1300, it's certainly no bargain, but in my experience, it's the Mercedes among pure cover machines. It is designed simply – after threading, you can start sewing very quickly without reading the (concise and well-structured) manual.
It is solidly built and can be expanded with lots of accessories, e.g. with a belt loop folder, a piping foot or a double fold guide, which screws onto the threads in the sewing table. The machine reliably transports the sewing material with 3 feed dogs and sews practically without skipped stitches over thick and thin.
After the first sewing attempts, which will soon be followed by many more, I have to say: I am completely thrilled with the machine. The CoverStitch works amazingly quietly and incredibly fast. The user manual of the CoverStitch is reduced to the bare essentials, practical and easy to understand.
Getting started with sewing pleasure was no problem: No long flipping through the user manual, no annoying threading maneuver - simply beautiful, smooth, elastic, error-free seams right away.
I am happy. What more do you want. :)
By now, the Baby Lock CoverStitch is even available here on Amazon* :)
Be sure to also check out how to use the CoverStitch with the practical piping foot.
Did this post help you?
Feel free to give me feedback in the comments!
Happy simple covering
your Sabine
P. S.: Have you gotten the urge to start sewing?
Find your new sewing project in my shop now!
Comments
Comments are loading …